Image Alt

Architecture Guide for Metal fabrication

  /  Metal Fabrication   /  Architecture Guide for Metal fabrication
Architecture Guide for Metal fabrication
Architecture Guide for Metal fabrication

There are many different ways that different metal items can be produced and the process to do this is what is referred to as a metal fabrication. Metal fabrication ensures that architecture can get the specific metal requirements that they need whether for gates and railings in London or for any other project.

Architectural Steel fabrication in London consists of a combination of diverse qualities such as technology, great experience as well as craftsmanship to ensure very high standards.

You may be wondering about the process for metal fabrication works. We have put a guide together just for you.

Designing and planning

Architectures and fabricators then come up with a design that works best for the client’s needs. It is at this point where there is a need for more clarity on what is needed inclusive of the smallest details


This step is where the quantities of metal sheets are determined. Experts choose the correct cutting procedure, the shapes and even finish. This will help in getting the order right.


The amount of time it takes any metal fabrication work is dependent on the complexity as well as the demand a given shop has received. It is important to start on a project when you are sure you have all that you need.

Metal Fabrication Process

The following are some of the processes that you should consider for your metal fabrication processes.

Cutting: This is a very basic but crucial process. This can be achieved through laser cutting, chopping, shearing and chiselling among other methods.

Casting: Using a die, a fabricator will pour molten metal which cools down and the die can then be removed.

Forging: This process uses high pressure and metal can be compressed to any shape that is needed.

Punching: Using turrets punch, pre-designed patterns are punched into the metal to give the needed impression.

Drawing: Utilises tensile force in pulling liquid metal into a tapered die.

Milling: In this process, perforations are created on the metal.

Drilling: This process involves cutting holes into the metal in circular bits.

Turning: In this process, a technician is able to radially cut the metal as it spins.

Extrusion: In this process, a ram is used to force billets through a die and you can get cylindrical parts. These parts are inclusive of pipes or even electrical wires.